XMLTV

Forum rules
Get Help using the Schedules Direct service. NOTE: application issues are probably better resolved via the application's support methods. If you post here, at least include your application name!
Post Reply
sbtvlist
Posts: 38
Joined: Fri Aug 17, 2007 10:29 pm

XMLTV

Post by sbtvlist »

sb8715

WARNING: multiple channel mappings for 'WPIXDT2'
WARNING: multiple channel mappings for 'AETVHD'
WARNING: Strange 710 has no callsign. Skipping
WARNING: multiple channel mappings for 'DSCHD'
WARNING: multiple channel mappings for 'SCIHD'
WARNING: multiple channel mappings for 'TLCHD'
WARNING: multiple channel mappings for 'APLHD'
WARNING: multiple channel mappings for 'HSTRYHD'
WARNING: multiple channel mappings for 'USAHD'
WARNING: multiple channel mappings for 'TBSHD'
WARNING: multiple channel mappings for 'SYFYHD'
WARNING: multiple channel mappings for 'CNNHD'
WARNING: multiple channel mappings for 'AMCHD'
WARNING: multiple channel mappings for 'ABCFHD'
WARNING: multiple channel mappings for 'DISNHD'
WARNING: multiple channel mappings for 'GOLFHD'
WARNING: multiple channel mappings for 'MLBHD'
WARNING: Strange 711 has no callsign. Skipping
Robert, hte errot here seemsin the per
Use of uninitialized value in concatenation (.) or string at /PerlApp/grab/na_dd
/tv_grab_na_dd line 1225.
WARNING: multiple channel mappings for ''

These wasnings seem in the cantination, Any advise.

Steve Birnbaum


Use of uninitialized value in concatenation (.) or string at /PerlApp/grab/na_dd
/tv_grab_na_dd line 1225.
WARNING: multiple channel mappings for ''

Use of uninitialized value in concatenation (.) or string at /PerlApp/grab/na_dd
/tv_grab_na_dd line 1225.
WARNING: multiple channel mappings for ''
WARNING: Multiple channel mappings found, please adjust Schedules Direct lineup
Writing schedule: ##########################################

rmeden
SD Board Member
Posts: 1563
Joined: Tue Aug 14, 2007 2:31 pm
Location: Cedar Hill, TX
Contact:

Re: XMLTV

Post by rmeden »

The Multiple channel messages are just what it says. XMLTV doesn't have a way to handle multiple channel matches so tv_grab_na_dd complains. If you Edit your lineup on the SD site you'll see things like SCIHD is on two channels (say 220 and 440). Remove one.

The "No Callsign" I've heard of before. It was either a bug in _na_dd that I fixed, but I think it was a data problem from Tribune. Try the "re-add lineup" and see if that makes it go away. Do the "re-add" before you edit your lineup to remove dupes just in case you lose your changes.

Once the errors are reduced we can dig into other issues.

Robert

sbtvlist
Posts: 38
Joined: Fri Aug 17, 2007 10:29 pm

Re: XMLTV

Post by sbtvlist »

Robert thanks.

The errors seem to have cleared.

This for the config script xmltv tv_grab_na_dd --configure

My lineup (Comcast) dublicates stations in the 200 and 800 range. 233 is CBS as is 802. I have both selected in the SD schedule but the output file does not have the 802. The same goes for any duplicate call sign in this range. It seems to grab the first but not the second.

Any thoughts why this is occuring.

Thanks,

Steve

rmeden
SD Board Member
Posts: 1563
Joined: Tue Aug 14, 2007 2:31 pm
Location: Cedar Hill, TX
Contact:

Re: XMLTV

Post by rmeden »

yes, it is by design.

XMLTV doesn't have a way to map multiple channels to the same station-id.

You should disable the one you don't care about on the SD web site.

Robert

sbtvlist
Posts: 38
Joined: Fri Aug 17, 2007 10:29 pm

Re: XMLTV

Post by sbtvlist »

Robert,

THanks, that's what I thought.

One last thing. When I run the config script this error is coming up

The command is xmltv tv_grab_na_dd --configure

This is the error.

Use of uninitialized value in sprintf at /PerlApp/grab/na_dd/tv_grab_na_dd line
1134, <STDIN> line 1.

alwayslate
Posts: 8
Joined: Thu Jun 16, 2011 10:48 am

Re: XMLTV

Post by alwayslate »

sbtvlist wrote:Robert,

THanks, that's what I thought.

One last thing. When I run the config script this error is coming up

The command is xmltv tv_grab_na_dd --configure

This is the error.

Use of uninitialized value in sprintf at /PerlApp/grab/na_dd/tv_grab_na_dd line
1134, <STDIN> line 1.
SB,

I have had this error a few times, and it has been smooth upon restart. May very well be a bug, or it could be the fact that I am running DS in tandem with an enterprise cloud server I use for my corporate job in the city. Either way, a restart has been a quick fix. If for some reason it is the server I would like to figure out a more long term fix, though. I would love to have a little bit of assistance with htis, as this is the kind of knowledge that really stands out when you are looking for IT jobs.
Last edited by alwayslate on Thu Jan 19, 2012 10:23 am, edited 1 time in total.

sbtvlist
Posts: 38
Joined: Fri Aug 17, 2007 10:29 pm

Re: XMLTV

Post by sbtvlist »

I am getting this error. Any idea?



Use of uninitialized value in concatenation (.) or string at /PerlApp/grab/na_dd
/tv_grab_na_dd line 1225.
WARNING: multiple channel mappings for ''
Use of uninitialized value in concatenation (.) or string at /PerlApp/grab/na_dd
/tv_grab_na_dd line 1225.

rmeden
SD Board Member
Posts: 1563
Joined: Tue Aug 14, 2007 2:31 pm
Location: Cedar Hill, TX
Contact:

Re: XMLTV

Post by rmeden »

That's pretty weird... look at your SD channel list.. is there a station w/o a callsign or with a callsign of "*" If so, disable them.

Post Reply