DataDirect replacement service going live!

Forum rules
Get Help using the Schedules Direct service. NOTE: application issues are probably better resolved via the application's support methods. If you post here, at least include your application name!

Re: DataDirect replacement service going live!

Postby mattlach » Sun Oct 19, 2014 3:23 pm

ericwl wrote:VERIZON FIOS here too; maybe a common variable to this problem...



You having the same problem? All the excluded channels using the web interface suddenly appearing?
mattlach
 
Posts: 16
Joined: Mon Jun 23, 2014 10:46 am

Re: DataDirect replacement service going live!

Postby johnsonx » Sun Oct 19, 2014 3:46 pm

NextPVR v3.2.9 now working again; both lineup and full EPG downloads produce expected results in reasonable times (2 seconds for lineup only, 50 seconds for full EPG).

johnsonx wrote:I tested NextPVR 3.2.9 with SD-DD a week ago and all seemed well. Now NextPVR users are starting to report getting no EPG data since SD-DD went live and TMS started re-directing traffic.

I tested here, and I'm getting a good login and response, but like others have reported the download is basically empty. Here's what I get when I ask NextPVR to download my lineup:
Code: Select all
<xtvdResponse type='ns1:xtvdResponse'>
<messages type='ns1:messages'>
<message>Your subscription will expire: 2015-09-28T06:29:24Z</message>
</messages>
<xtvd from='2014-10-19T00:00:00Z' to='2014-10-19T00:00:00Z' schemaVersion='1.3' >
<stations>
</stations>
<lineups>
<lineup id='CA04977:X' name='Time Warner Cable' location='Santa Ana' type='CableDigital' device='Digital' postalCode='92705' >
</lineup>
</lineups>
</xtvd>
</xtvdResponse>
johnsonx
 
Posts: 4
Joined: Fri Oct 10, 2014 9:03 pm

Re: DataDirect replacement service going live!

Postby mattlach » Sun Oct 19, 2014 3:47 pm

An excerpt of my mythfilldatabase output:

Code: Select all
2014-10-19 18:41:01.101882 I  Opening blocking connection to master backend
2014-10-19 18:41:01.176175 I  New Client:  (#1)
2014-10-19 18:41:01.678792 I  Updating source #1 (SchedulesDirect) with grabber schedulesdirect1
2014-10-19 18:41:01.679139 I  Found 740 channels for source 1 which use grabber



Compared to a screenshot of my SchedulesDirect account:

Image

As you can see, I shouldn't have all 740 channels appearing...
mattlach
 
Posts: 16
Joined: Mon Jun 23, 2014 10:46 am

Re: DataDirect replacement service going live!

Postby rmeden » Sun Oct 19, 2014 6:41 pm

Matt, I don't know your SD username to check the DB.

Eric, you look good in the DB.. are you still having the problem? I wonder if the failed DB load this morning caused a problem.
rmeden
SD Board Member
 
Posts: 1518
Joined: Tue Aug 14, 2007 2:31 pm
Location: Cedar Hill, TX

Re: DataDirect replacement service going live!

Postby ericwl » Sun Oct 19, 2014 7:18 pm

I'm just coming up to speed (didn't realize what was happening with format change!)

I just ran successfully so must have hit the good side of 50% .

Will XMLTV provide a windows binary with the changes necessary (or am I missing something here again?) ???
ericwl
 
Posts: 3
Joined: Tue Nov 13, 2012 9:45 pm

Re: DataDirect replacement service going live!

Postby rmeden » Sun Oct 19, 2014 7:39 pm

There will be an official XMLTV release shortly.. in the mean time.. http://alpha-exe.xmltv.org
rmeden
SD Board Member
 
Posts: 1518
Joined: Tue Aug 14, 2007 2:31 pm
Location: Cedar Hill, TX

Re: DataDirect replacement service going live!

Postby SFischer1 » Sun Oct 19, 2014 8:05 pm

rmeden wrote:There will be an official XMLTV release shortly.. in the mean time.. http://alpha-exe.xmltv.org


Will this official XMLtv need to be installed by November 1, 2014?

Some one has indicated that the 50% SD /TMS will go to 100% SD.

Thus any old XMLtv could be used without even the "hosts" file addition.

Please clarify.

TIA

SHF
SFischer1
 
Posts: 19
Joined: Thu Aug 23, 2007 12:40 am

Re: DataDirect replacement service going live!

Postby mattlach » Sun Oct 19, 2014 8:35 pm

rmeden wrote:Matt, I don't know your SD username to check the DB.


Thank you,

Username is mattlach
mattlach
 
Posts: 16
Joined: Mon Jun 23, 2014 10:46 am

Re: DataDirect replacement service going live!

Postby rmeden » Sun Oct 19, 2014 10:24 pm

SFischer1 wrote:Will this official XMLtv need to be installed by November 1, 2014?

Some one has indicated that the 50% SD /TMS will go to 100% SD.

Thus any old XMLtv could be used without even the "hosts" file addition.

Yes, on all counts. Right before Nov 1, I plan to ask Gracenote to update DNS so we get 100% of the traffic rather than 50%. After Nov 1, Gracenote won't be able to request any changes and the domain name can go away at any time. So I have no idea when you'll break post Nov if you're still on Tribune's servers. It could be Nov 3, 2014. it could be in the year 2525 (if man is still alive)

I suggest you replace your xmltv.exe with the alpha-exe and move on with your life :) There's no reason to wait for the official release,

Robert
rmeden
SD Board Member
 
Posts: 1518
Joined: Tue Aug 14, 2007 2:31 pm
Location: Cedar Hill, TX

Re: DataDirect replacement service going live!

Postby rmeden » Sun Oct 19, 2014 10:31 pm

mattlach wrote:
rmeden wrote:Matt, I don't know your SD username to check the DB.

Username is mattlach

Duh.. I thought I tried to look that up.

I show 662 stations excluded. Are you still seeing the stations in your download?

If you are try editing your SD lineup, just click save, and test again.
rmeden
SD Board Member
 
Posts: 1518
Joined: Tue Aug 14, 2007 2:31 pm
Location: Cedar Hill, TX

PreviousNext

Return to Support

Who is online

Users browsing this forum: No registered users and 3 guests

cron